RT Series Cooling Tower

COOLING TOWERS DESIGN FEATURES

  • Durable Heavy Duty Construction
  • All Fiberglass and Seamless Construction
    • Offers long service life, minimum to zero maintenance and no water leaking problems.
  • Longer Life Span
    • REYMSA’s all high-grade fiberglass construction will deliver a tower with 2 times the life span of galvanized steel tower.
  • Small Footprint
    • Offers excellent performance in a compact footprint.
  • Low Environmental Impact
    • Our equipment and motors are designed to conserve water and save energy. Meet or exceed ASHRAE Standard 90.1 efficiency requirements.
  • Low Sound & Super Low Sound Fan
    • REYMSA offers these optional models for sound sensitive areas.
Downloads

 

The RT Series Cooling Tower has more than 3,800 CTI certified models from which our customers can choose from to fit the requirements for any application.

RT MODELS

  • More than 700 CTI certified models.
  • Induced Draft, Counterflow.
  • 25 – 1,471 Nominal Tons*.
  • One, Two or Four fans with Direct Drive System.
  • Low Sound & Super Low Sound fan option.

 

RTM Modular Models

  • More than 360 CTI certified models.
  • Induced Draft, Counterflow.
  • 227 - 756 Nominal Tons* each module.
  • Two fans with Direct Drive System.
  • Low Sound & Super Low Sound fan option.
  • Modular configuration for increased capacities and to accommodate any heat load.

 

RTU Models

  • More than 250 CTI certified models.
  • Induced Draft, Counterflow.
  • 25 – 1,172 Nominal Tons*.
  • One, Two or Four fans with Direct Drive System.
  • Excellent for transport in shipping containers due to their reduced height.
  • Offers excellent performance in a compact footprint.
  • Low Sound & Super Low Sound fan option.

 

RTG Models

  • More than 400 CTI certified models.
  • Induced Draft, Counterflow.
  • 182 - 944 Nominal Tons*.
  • Single Fan Gear Driven Models.
  • Optional Direct Drive System with a permanent magnet motor available for 10’ & 12’ wide models.
  • Low RPM fan.
  • Low Sound by design.
  • Best cost per ton due to its large box with a low HP motor.

 

RTGM Modular Models

  • More than 450 CTI certified models
  • Induced Draft, Counterflow.
  • 178 - 944 Nominal Tons* per module.
  • Single Fan Gear Driven Models.
  • Optional Direct Drive System with a permanent magnet motor available for 10’ & 12’ wide models.
  • Low RPM fan.
  • Low Sound by design.
  • Modular configuration for increased capacities and to accommodate any heat load.
  • Best cost per ton due to its large box with a low HP motor.
  
   

 

 RTP models are the best cooling solution in any application, as their advanced design allows them to offer the best performance.

FEATURES OF RTP MODELS

  • INCREASED CAPACITY

RTP models offer increased capacity up to 5% compared to RT models and up to 15% compared to Low Sound Models.

  • ENERGY EFFICIENT

Improved design and permanent magnet motors offer greater energy savings, higher power densities, and improved control.

  • ULTRA LOW SOUND

Reduced noise operation, even lower than our Low Sound and Super Low Sound models without sacrificing capacity

  

RTP MODELS

  • Over 130 CTI certified RTP models.
  • Induced Draft, Counterflow.
  • RTP models are available in one, two or four fan units.
  • Capacities ranging from 136 - 1,314 Nominal Tons1 in a single unit.

 

RTUP Models

  • Over 50 CTI certified models.
  • Induced Draft, Counterflow.
  • 133 – 1,149 Nominal Tons*.
  • Excellent for transport in shipping containers due to their reduced height.

 

RTPM Modular Models

  • Over 90 CTI certified models.
  • Induced Draft, Counterflow.
  • Capacity: Starting at 256 Nominal Tons.
  • Two fans, Direct Drive System with a permanent magnet motor.
  • Modular models are units intended to be mounted adjacent to each other, allowing the tower to grow to any size as the tower can have an unlimited number of modules to increase capacities and accommodate any heat load.
  

NEW RTGTC MODELS

RTGTC models are the highest capacity units, up to 4,050 gpm per unit and offer low sound by design.

  • More than 400 CTI certified models.
  • Induced Draft, Counterflow.
  • 223 - 1,350 Nominal Tons*.
  • Single Fan Gear Driven Models.
  • Optional Direct Drive System with a permanent magnet motor.
  • Low RPM fan.
  • Low Sound by design.
  • Best cost per ton due to its large box with a low HP motor.
  • NEW 14' BOX SIZE.

 

NEW RTGMTC MODELS

RTGMTC models offer high capacities, up to 7,790 gpm per module. Modular towers can have an unlimited number of modules to increase  capacities and accommodate any thermal load complete with CTI-Certification.

  • More than 860 CTI certified models.
  • Induced Draft, Counterflow.
  • Starting at 276 Nominal Tons*.
  • Single Fan Gear Driven Models.
  • Optional Direct Drive System with a permanent magnet motor.
  • Low RPM fan.
  • Low Sound by design.
  • Best cost per ton due to its large box with a low HP motor.
  • NEW 14' BOX SIZE.

NEW TITAN MODELS WITH ADDITIONAL SIZES, UP TO 28’ X 25’ BOX SIZE

RTGTC & RTGMTC models can offer up to 15% more capacity than RTG models in the same footprint.

  
Our Cooling Towers are designed to be sustainable and have a low environmental impact.